Description
General Description
Arc 666 is a multi-functional micro controller based surgical diathermy suitable for both open and endoscopic procedures ranging from pediatrics to cardiac surgeries. Specialized functions include soft/spray coag ,bipcut/underwater cut, combi mode for laparoscopic surgeries etc. It comes with 10 programmable memory which can store all power setting and advanced functions. Seperate TURP socket is provided for TURP applications
Salient Features
- Programming facility for power and advanced functions enabled
- 10 memory loactions for power and functions.
- Three types of monopolar coagulation.
- Soft coag for charr free contact coagulation.
- Forced coag for sealing bleeders.
- Spray coag for wide area superficial non-contact coagulation.
- HF output power settable digitally in small increments.
- Optional bipolar auto coagulation feature.
- Steady HF output at set value even under line voltage fluctuating conditions (VIP Feature).
- Audio & visual monitoring of patient plate circuit.
- Combined or independent use of mono & bipolar functions enabled.
- Separate generator for monopolar and bipolar functions.
- Autoclavable accessories.
- Smooth bipolar cut for adhesionolysis.
- Relatively charring free whitish bipolar coagulation effects.
- Combination use of mono cut & bipolar coag for laparoscopic surgeries enabled.
- SMPS Power supply.
Standard Accessories
- Colour coded double pedal footswitch with cable and connector.
- Silicone rubber patient plate with detachable connection cable& rubber strap with punched holes.
- Reusable Active electrode handle with set of 4 electrodes & silicone rubber insulated cable.
- Reusable insulated bipolar forceps with silicone rubber insulated cable.
- Reusable Handswitch surgical pencil with one flat electrode.
Technical Specifications
- Monopolar Cutting : 400 Watts.
- Monopolar Forced Coag: 100 watts.
- Monopolar Spray Coag: 100 watts.
- Monopolar Soft Coag: 100 watts.
- Blend in 2 steps.
- Bipolar Coagulation Power : 120 Watts.
- Bipolar Cut Power: 120 Watts.
- Bipolar Auto Coag : 120 watts (variable) - Optional
- Monopolar Rated frequency: 500 KHz.
- Bipolar Rated frequency: 1000 KHz.
- Power supply : 500 Watts (230 Volts, 50 Hz.)
- HF Power Display : 3 digit LED display
- HF Power control : Digital control in small increments
- TURP/underwater cutting: Monopolar outputs same as given above
- Handswitched output: Monopolar outputs same as given above
- Laparoscopy output: Monopolar & bipolar outputs same as given above
- SMPS – Power supply system utilized
Line voltage fluctuation compatibility
- Working range : Steady HF output for line voltages from 170 to 250 volts, 50 Hz
- Maximum range : Steady HF output for line voltages from 200 to 250 volts, 50 Hz
Physical Dimensions
- Unit size : 450 x 390 x 118 mm.
- Unit gross weight : 9.5 Kgs.
* Due to continuous improvement in design for compliance with International standards, the technical specifications are subject to alterations without notice.