General Description

The Rolla Multi is an Ideal pump for both diagnostic and operative hysteroscopy. It finds application as a suction cum irrigation pump in laparoscopy. In arthroscopy it finds application in shoulder and knee surgeries. It can also be used for dilation of Uretro-renoscopy. Sensor controlled dilation of human organs to preset pressures and flow rates are possible.. No risk of air embolism while irrigating from bottles thanks to peristaltic pumping and the high power suction enables easy cleaning of surgical site.

Salient Features
  • Independent transducer control for laparoscopy & hysteroscopy.
  • Standalone operation possible for suction/irrigation/infusion.
Suction Cum irrigation function
  • Irrigation pressure variable & settable in steps of 1mm Hg.
  • No risk of air embolism thanks to peristaltic non-contact pump.
  • Variable flow rate and start against vacuum possible for suction pump.
  • Back flow to pump protected with special filter & overflow from Suction bottle prevented with float assembly.
  • Imported motor-pump assembly gives long life and relatively silent performance (<50db).
Infusion cum Suction function
  • Intra organ dilation pressure variable in steps of 1mm Hg.
  • Easily detachable and fully autoclavable tubing & connectors for the transducer circuit.
  • No risk of air embolism thanks to peristaltic non-contact pump.
  • Long life alloy roller, heavy duty roller tubing, imported transducer & motor-pump assy ensures repeat performance.
  • As a Suction cum irrigation pump in laparoscopic procedures.
  • As a Hysteromat in hysteroscopy.
  • As an Arthropump in arthroscopy & shoulder surgeries.
  • As a Uromat in ureterorenoscopy.
  • As a slow suction non contact pump for TURP (Special adapter available)
Standard Accessories
  • Rolla Multi pump with integral controls, pressure chamber etc - 1 set.
  • Suction collection bottle with rubber cap & float assy - 1 set.
  • Irrigation bottle puncture cannula - 1 no.
  • Connection tubing for suction & irrigation/infusion - 1 set.
Technical Specifications
  • Intra organ pressure: 50 to 225 mmHg.
  • Infusion mode.
  • Liquid flow rate (variable) : 50 to 1000ml/min
  • Irrigation mode - Irrigation pressure: 100 to 450mm Hg.
  • Liquid free flow rate: 250 to 2000ml/min.
  • Vacuum: 600mm hg.
  • Flow rate: 15 litres/min: 100watts (230 volts, 50Hz).
  • Power consumption: 100watts (230 volts, 50Hz)
Technical Specifications
  • Unit Dimensions: 380 x 200 x 150mm.
  • Weight: 9Kg.

* Due to continuous improvement in design for compliance with International standards, the technical specifications are subject to alterations without notice.

Back to Top